Manufactured or mobile homes have limited regulations in regards to land use and are only permitted in the existing manufactures home parks in Red Deer. Typically, they are moved onto existing lots and placed where the previous home was.

A Development and Building Permit are required. You will also need permits to hook up the plumbing, gas and electrical to the manufactured home.

Only a licensed contractor can hook up the electrical, gas and plumbing to a manufactured home.

A Development Permit is required to ensure that the structure you are proposing to build on your property complies with the Zoning Bylaw in regards to placement, size and height. 

How long does it take to process?

Note: During building season (April 1 - October 31), processing times may take longer, due to the number of applications that are submitted during this time.

In most cases, it will take 5-7 business days for review and decision. 

Also important to note, if your project requires a variance to regulations or is a discretionary use (redevelopment) in the Zoning Bylaw, there is a 21-day appeal period before the permit can be issued, if approved.

What are the fees?

Please refer to 'Schedule A' of the Development Permit Fee Bylaw to find the fees associated with the Development Permit.

A Building Permit is required to review the safety components of placing a mobile home on a lot, ensuring it is constructed correctly and is safe for you to use.

How long does it take to process?

Note: During building season (April 1 - October 31), processing times may take longer, due to the number of applications that are submitted during this time.

In most cases, it will take 7-10 business days to review and issue. The Building Permit cannot be issued until the Development Permit has been issued. 

What are the fees?

The fees have recently been updated, please refer to revised Schedule A for current fees: Safety Codes Fee Schedule April 2024 (pdf)

The Safety Codes Permit Bylaw 3551/2015 (pdf) to find the fees associated with a Building Permit for residential dwellings.

Before submitting your permit applications, you need to prepare all the plan documents and forms that are required for your submission. Review the respective requirements list and forms for each permit.

User Guides

These guides will help you prepare and save your required plan documents to submit during your application process.

• Plan and Document Submission Standards for Permits (pdf)

Development Permit

• Development Permit Application Requirement List: Residential (pdf)
• Letter of Authorization (pdf)
• Letter of Intent (pdf)

Building Permit

• Building Permit Application Requirement List: Miscellaneous (pdf)
• Building Permit Application Form (pdf)
• Letter of Authorization (pdf)
• Letter of Intent (pdf)

How do I apply?

Building Permits and Development Permits

Building Permits and Development Permits can be submitted online using MyPermits. Please ensure you have all the documents and drawings you need for your project by following the requirement list and plan submission standards documents from Step 1: Prepare your documents. You will be required to upload these files to ProjectDox to complete your application. If the application is incomplete, the permit will be returned to you to submit the missing items.

1. Visit MyPermits and complete a Building Permit application.
2. You will receive an email to the address you specified as the applicant inviting you to access your project in ProjectDox for your permit application.
3. Log in to ProjectDox with an existing account or with your temporary password provided in the email.
4. Upload the plan documents you prepared for your application from the Upload & Submit task on your dashboard.

For assistance, refer to our ProjectDox Applicant Guide (pdf).

Once we receive your complete permit applications, the Development Officer and the Building Safety Codes Officer will conduct a review of the permits, ensuring the proposed development complies with the Zoning Bylaw and the Safety Codes Act, respectively.

You will receive email notifications throughout the application process, including:

• If we need more information;
• When payment is required;
• When the permit is issued.

Good to know info...

Did you know that some email servers will block City of Red Deer emails? These emails will often end up in your junk/spam mail folder! Please add @reddeer.ca as an allowable sender to make sure you are receiving our emails.

You will need additional permits to put in lights and outlets, heat and plumbing.

• Electrical - for wiring outlets and lights or sub-panel
• Heating - for heating devices, such as a wood stove (solid fuel appliance)
• Gas - for gas appliances, such as a unit heater, radiant heater, furnace or a boiler
• Plumbing - for floor drains, sinks, showers, wash stations, etc.

Who can apply?

Homeowners:

The City of Red Deer allows homeowners to obtain permits; however, if you have no previous knowledge or experience with these installations, you should engage the services of a licensed contractor to apply for the required permits and complete the work.

There are a few exceptions:

• Gas permits may only be obtained by a licensed gasfitter
• Heating permits may only be obtained by a licensed heating contractor
• Homeowners cannot obtain an Electrical Permit for the following work:
  
  • hot tubs or pools
  • main service or panel changes
  • duplex, townhouse or any unit with a shared wall
  • secondary suites
  • solar panels
  • rental properties
  • electrical car charging stations.

Contractors:

Contractors applying for permits require a valid City of Red Deer Business Licence. Please visit our Licensing page should you require a new or renewed licence prior to applying for your permit.

How do I apply?

Homeowners and contractors can apply online using MyPermits, or submit an application form via email to inspections@reddeer.ca.

• Electrical Permit Application (pdf)
• Gas Permit Application Form (pdf)
• Heating Permit Application Form (pdf)
• Plumbing Permit Application Form (pdf)

What inspections will I need?

The required inspections will be determined when the Safety Codes Officer reviews your application, and will be listed on the Safety Codes Building Permit when it is approved and issued.

If you've obtained any sub-trade permits, you may need two inspections during the course of the respective permit. 

1. A rough-in inspection before concealing any work
2. A final inspection once everything is complete

If you obtain multiple sub-trades permits, these inspections will apply to each permit type.

When can I schedule an inspection?

Once your Safety Codes Building Permit has been approved and issued, you will receive an email with instructions of how to schedule an inspection.

How do I know the outcome of my inspection(s)?

You will receive an email notification informing you of the outcome of each inspection.